Reza MasoudiNejad
   

PhD

Mechanical Engineering-Applied Design

Department of Mechanical Engineering,

University of Electronic Science and Technology of China (UESTC)

Date of Birth: 27/Nov/1987

E-mail:  masoudinejad@uestc.edu.cn

Personal web site:   http://faculty.uestc.edu.cn/masoudinejad/en/index.htm
Education:

PhD, Mechanical Engineering – Applied Design, Ferdowsi University of Mashhad, Mashhad, Iran, 2014-2017.

M.Sc. in Mechanical Engineering – Applied Design, Sharif University of Technology, Tehran, Iran, 2010-2013.

B.Sc. in Mechanical Engineering – Solid Mechanics, Shahrekord University, Shahrekord , Iran, 2006-2010.

Research Interests:

Fatigue and Fracture Mechanics
Stresses, Fatigue and Friction of Rolling/Sliding
Surface Science and Damage
Contact Mechanics
Residual Stress Measurement and Prediction
Finite Element Methods
Applied Mathematics
Renewable Energy

Membership in societies and etc:

The Elite Person of Iran, since 2010 (see: www.BMN.ir ).
Young Researchers Club, since 2011 (see: www.MPJ.ir).
Iranian Society of Mechanical Engineering, since 2012 (see: www.ISME.ir).

Teaching:
 

Undergraduate courses:

  • Mechanical Engineering Design I, II
  • Strength of Materials I, II
  • Mechanical Vibrations
  • Dynamics of Machinery
  • Dynamics
  • Statics
  • Bearing and Lubrication

Post graduate courses:

  • Continuum Mechanics
  • Non-Linear Elasticity
  • Theory of Plates and Shells
  • Fatigue, Creep and Fracture
  • Fracture Mechanics
  • Metal Forming


Advisor for Bachelor Projects:

Undergraduate Students:
  • Finite Element Analysis of Residual Stresses in Railroad Wheel during the Manufacturing Process, E. Tadayon, 2014, Islamic Azad University of Najafabad, Isfahan, Iran.
  • Finite Element Modeling of Contact Interaction between Wheel and Rail by Ansys Software, Y. Kalbali, 2014, Islamic Azad University of Najafabad, Isfahan, Iran.
  • Finite Element Analysis of Residual Stresses in Welding Process, A. Sheykhan, 2014, Islamic Azad University of Najafabad, Isfahan, Iran.
  • Simulation of Fatigue Crack Growth by FRANC3D Software, H.S. Farahani, 2014, Islamic Azad University of Najafabad, Isfahan, Iran.
  • Investigation of Laser Drilling Processing Methods. S. Saberian, 2014, Islamic Azad University of Najafabad, Isfahan, Iran.
  • Failure Analysis of Rolls of Rolling Mill in Steel Plants, J. Y. Mohammadi, 2014, Islamic Azad University of Najafabad, Isfahan, Iran.
  • Numerical Study on the Effect of Overload Parameters on Fatigue Life, A. A. Kamyab, 2014, Islamic Azad University of Najafabad, Isfahan, Iran.
  • Design a 10kW Solar Chimney Power Plant: A Case Study-Isfahan Project, H. Ghafaripour, 2014, Islamic Azad University of Najafabad, Isfahan, Iran.
  • The design and construction of a solar concentrator system for rural zones, M. J. Minakar, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Design and Optimization of   a solar concentrator system, A. M. Zamani, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • The design and construction of a routing robot, M. Shafati, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • A numerical study of fatigue crack growth path under uniaxial cyclic loading, A. Sayyah, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Investigation on the Effects of Process Parameters on Laser Drilling Using FEM, M.K. Alirezaei, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Stress analysis of various types of flanged joint using ANSYS software, F. Ganjali, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Stress analysis of rail/wheel contact using ANSYS software, A.H. Heydari, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • The design and construction of a coffee roasting machine, H. Jannesar, M. Rajaei and A. Shirmohammadi, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Finite element analysis of welding process in a large thin-plate panel structure, H. Ashoory, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • The design and construction of a 10kW Solar Chimney Power Plant, H. Balali, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Rolling contact fatigue analysis in railroad wheel under the influence of wear, M. Salimi, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Development of finite element model for analysis of Fatigue Crack growth in Rails, A. H. Lotfi, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Welding simulations of steel joints by finite element analysis, O. Gholami, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Monorail system and structures: a case study-Qom monorail project, M. Bolfakke, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Simulation of residual stresses in railroad wheel during the quenching process, M. R. Salmani, 2018, Foolad Institute of Technology, Isfahan, Iran.
  • A survey on MEMS piezoresistive pressure sensor, H. Abbasifard,  2018, Foolad Institute of Technology, Isfahan, Iran.


Graduate Students

M.Sc.

  • Analytical solution of vibration, wave propagation and energy reflection of Mindlin-Reissner’s higher order shear deformation theory of plate using extended wave propagation method, H. Bedashti, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Numerical and experimental investigation of bending angle sheet metals using in laser forming process of composite two layered copper-aluminum, S. Z. Hoseini, 2017, Foolad Institute of Technology, Isfahan, Iran.
  • Numerical and Experimental Investigation on Fatigue Crack Growth Behavior in Thick-Walled Pressure Vessels, H. Ghasemi, 2018, Foolad Institute of Technology, Isfahan, Iran.
  • Numerical and Experimental Investigation on Fatigue Life in Standard Specimens under the Influence of Overload Parameters, J. Ali Babaei, 2019, Foolad Institute of Technology, Isfahan, Iran.
  • Numerical and experimental study on fatigue life in rail specimens under the influence of overload parameters, A. Gholami, 2019, Foolad Institute of Technology, Isfahan, Iran.
  • Numerical analysis of fatigue crack in the working rolls under influence of the stress field due to hot rolling process, P. Noroozian, Foolad Institute of Technology, Isfahan, Iran, in progress.
  • A study on the fatigue crack growth in railway rails under the influence of impact loading, S. M. Hashemi, Foolad Institute of Technology, Isfahan, Iran, in progress.
  • Fatigue life prediction of 2024-T3 aluminum alloy adhesively bonded T jonits, M. Hadi, Foolad Institute of Technology, Isfahan, Iran, in progress.
  • An investigation on fatigue crack growth behavior and fatigue life estimation of riveted joints in Al-alloy 2024 plates, M.R. Tohidi, Foolad Institute of Technology, Isfahan, Iran, in progress.
  • Modeling of creep in ethane cracking gas furnaces under the influence of thermal stress field, B. Niknam, Foolad Institute of Technology, Isfahan, Iran, in progress.

Ph.D.


REVIEWER ACTIVITY:

JOURNALS

Reviewer Page (Reza Masoudi Nejad)

Publons (Reviewer Page)

Acknowledgment to reviewers 2014

EDITORIAL BOARDS

International Scientific Committee and Editorial Boards

PhD Reza Masoudinejad